Interferometer

View of the interferometer on a optical table in the laboratory. Optoelectronic device with in front of a large prism and a lens with a computer monitor with graphics on the back
Organizational Unit
OPTICS DEPARTMENT

Grants related:

Description

The Zygo interferometer is a Fizeau-type interferometer dedicated to measuring surface defects of flat and spherical optical elements. Likewise, it allows the precise measurement of radii of curvature and can be used as an alignment tool in the assembly of complex optical systems. The basic system consists of a Fizeau interferometer with a laser head, 4-inch collimated output beam, framegrabber and acquisition software.

Related Technical facility
General view of one of the rooms (A) of the optical laboratory. Elongated laboratory with metal tables with holes and various optical and mechanical elements on top of them
Optics Laboratory

The Optics Laboratory is specialized in the realization of all type of optical measurements, alignment and integration of instruments, prototype tests and characterization of components and optical systems in general.

José Luís
Rasilla Piñeiro
Roberto
López López
View of the Differential interferometer in the laboratory. Small optical and electronic devices aligned on a laboratory table
Differential interferometer

Device dedicated to the precise measurement of displacements between two flat mirrors.

View of the Wavescope wave front sensor in the laboratory. Medium-sized appliance on an optical table with holes, in the front of which has an entrance for light covered with a lid
Wavefront sensors

Devices for measuring the aberrations of an optical wavefront.

Related Capability
View of an engineer assembling a grism in the laboratory. Engineer placing a piece of glass in a metal cylinder
Design, development and verification of optical systems

The IAC Technology Division has the capacity for developing complete optical elements and systems from the design stages to manufacturing follow-up, integration and final verification.

Type
Optic
Equiment type
Interferometer

It may interest you

  • ATOS 5
    ATOS 5

    El escáner 3D ATOS 5 es un digitador óptico de alta resolución que proporciona rápidamente datos de medición tridimensionales precisos. Este sistema ofrece ventajas para medir superficies reflectantes y objetos con hendiduras. Proyecta patrones de franjas precisos sobre la superficie del objeto y son capturados por dos cámaras. Dado que las

  • Automatic positioners
    Automatic positioners

    Dentro del laboratorio de óptica existen diferentes posicionadores que pueden ser controlados remotamente. Se puieden dividir en tres grandes grupos: Rotadores, Mesas de traslación y micrómetros. Proceden de diferentes casas y por tanto tienen diferentes controladores pero el software de control cara al usuario es similar. En la siguiente tabla se

  • Spherometer HOFBAUER
    Spherometer HOFBAUER

    El Esferómetro es un instrumento de precisión para medir radios de curvas en superficies esféricas convexas y cóncavas, como lentes, pares de vidrios de prueba, espejos, etc. Cuenta con una pantalla digital de los valores medidos y un software apropiado para la medición precisa de los radios de las curvas de las superficies. Dentro del tubo del

    José Luís
    Rasilla Piñeiro
Go back